More changes

I have assembled the z-rails on the 'vertical base'.
Remember how I'd decided to turn the 'vertical base' around, to landscape orientation? Well, I drilled my holes like that for affixing the z-framework (mark the holes on the right side through the assembled framework, start drilling from that side but remember to countersink from the other side) and I thought all was well until I realised that the final pivot arms actually go past the edges of the 'vertical base' (v.b.) and the z-stage. They are attached to the final angles, which are attached to the v.b. and extend to the front of the z-stage so it can't fall off the v.b..
So I need to cut the sides off my base now.